DOTDAY XBAR
5 oz heavy-duty dual-layer landscape fabric · Job site photos: Okie Hauling



Contractor catalog · Bulk rolls
We manufacture SHIELD, XBAR and TERRA for landscapers, hardscapers and site contractors, and we ship pallets from Miami Gardens, Florida to job sites across the country.
Job site photo: Okie Hauling
Roll it out · Load it up · Ship it out
The lineup
Spec by what the ground is doing: planting beds, hard surfaces, or water. Every figure below is from our ASTM test data, the same numbers shown on each product page.

3.2 oz · Woven polypropylene
Woven weed barrier built for garden beds, mulch, and farm rows.
| WeightASTM D5261 | 3.2 oz |
|---|---|
| Grab strength MD/CDASTM D4632 | 180/105 lb |
| Wide-width tensile MD/CDASTM D4595 | 21/18 kN/m |
| Trap tear MD/TDASTM D4533 | 82/75 lb |
| Grab elongationASTM D4632 | 25% |
| UV retention, 500 hrASTM G154 | 70% |

5 oz · Woven dual-layer (woven top + non-woven backing)
Heavy-duty dual-layer woven fabric for gravel, pavers, and hardscape.
| CBR puncture resistanceASTM D6241 | 332 lb |
|---|---|
| Water flow gal/min/sfASTM D4491 | 10.5 |
| Fabric weight per yd2ASTM D5261 | 5 oz |
| Grab tensile MD/CDASTM D4632 | 96/68 lb |
| UV strength at 500 hrsASTM G154 | 70% |
| ThicknessASTM D5199 | 29.5 mil |
Wider and longer XBAR rolls are back in January. Need coverage now? TERRA and SHIELD are in stock.

4 / 6 / 8 oz · Non-woven needle-punched geotextile
Non-woven geotextile for drainage, filtration, and separation.
| Property | 4 oz | 6 oz | 8 oz |
|---|---|---|---|
| Grab tensileASTM D4632 | 100 lb | 160 lb | 205 lb |
| Trapezoid tearASTM D4533 | 45 lb | 60 lb | 85 lb |
| CBR punctureASTM D6241 | 300 lb | 400 lb | 500 lb |
| Opening size (AOS)ASTM D4751 | 0.20 mm | 0.20 mm | 0.16 mm |
| Water flow, l/min/m²ASTM D4491 | 4,800 | 4,000 | 3,300 |
| Grab elongationASTM D4632 | >50% | >50% | >50% |
| ThicknessASTM D5199 | 1.0 mm | – | – |
Typical values from each weight's data sheet. Thickness is published for 4 oz only.
DOTDAY is landscape fabric we manufacture for contractors, tested to ASTM standards and spec'd for real job-site conditions: gravel drops, compaction, drainage and weed pressure.
| SHIELD 3.2 oz | XBAR 5 oz | TERRA 4/6/8 oz | |
|---|---|---|---|
| Construction | Woven polypropylene | Dual-layer woven | Non-woven needle-punched geotextile |
| Best for | Beds, rows and gardens under mulch | Gravel, rock, pavers and hardscape | Driveways, French drains, separation and erosion |
| Weed suppression | Primary function | Primary function | Secondary |
| Drainage | Water passes through | Water passes through | High-flow filtration |
| Under gravel and load | Light | Heavy | Heavy (6 and 8 oz) |
| Install guides | Guide lines | 12 inch yellow lines | None |
One-page data sheet for each fabric and weight: ASTM typical values, roll sizes and applications. Attach them to bids and submittals.
Woven polypropylene weed control fabric
Dual-layer capped fabric for gravel and hardscape
Non-woven needle-punched geotextile, one sheet per weight
| Spec | 4 oz | 6 oz | 8 oz |
|---|---|---|---|
| CBR puncture (lb)ASTM D6241 | 300 | 400 | 500 |
| Water flow (l/min/m²)ASTM D4491 | 4,800 | 4,000 | 3,300 |
| Grab tensile (lb)ASTM D4632 | 100 | 160 | 205 |
| AOS (mm)ASTM D4751 | 0.20 | 0.20 | 0.16 |
Typical values from ASTM testing, offered as guidance and not as minimum average roll values. Need a spec section or a sample for a submittal? Email rakshit@thedotday.com.







Made by us · Shipped by the pallet
We manufacture every DOTDAY roll and stage contractor orders on pallets at our Miami Gardens, Florida warehouse. Send your roll counts and job-site address; we quote tiered pricing and schedule delivery around your build.





Pallets ship from Miami Gardens, FL
DOTDAY XBAR 5 oz dual-layer weed barrier, install walkthrough
Watch on YouTubeDOTDAY TERRA non-woven geotextile, install walkthrough
Watch on YouTubeDOTDAY SHIELD 3.2 oz woven weed barrier, install walkthrough
Watch on YouTube







Enter your dimensions and the calculator returns the roll count with overlap and waste built in. Paste the result into your bulk quote request.
Tell us what you install and how much you go through per season. We quote SHIELD, XBAR and TERRA on tiered pricing by roll count or pallet, ship from Miami Gardens, Florida, and can schedule deliveries for larger jobs.
Yes. We manufacture SHIELD, XBAR and TERRA and quote contractors, landscapers, farms and municipalities on tiered, quote-based pricing by the roll count or pallet. Send your volumes through the bulk pricing form and we reply with a quote.
XBAR. It is a 5 oz dual-layer fabric, a woven top over a needle-punched backing, with 332 lb CBR puncture resistance (ASTM D6241). Use TERRA 8 oz for road base and heavy stabilization, and SHIELD for planting beds under mulch or soil.
TERRA non-woven geotextile. Water passes through the needle-punched mat while soil fines stay behind. Choose 4 oz for simple drainage, 6 oz for French drains and wall backfill, and 8 oz for road base.
XBAR 3 ft x 10 ft, 3 ft x 50 ft and 3 ft x 100 ft are in stock. The wider and longer XBAR rolls are back in January. SHIELD and TERRA are available now, and the size lists above show live stock.
Orders ship from our warehouse in Miami Gardens, Florida, and we have shipped to 48 states. For larger jobs we can schedule deliveries to match your project phases.
Enter your length and width in the landscape fabric calculator. It adds overlap and waste and returns the roll count, which you can paste straight into a bulk quote request.
Download the full catalog as a PDF for your crew, or send us your volumes and we will quote contractor pricing. Orders ship from Miami Gardens, Florida.
DOTDAY products are engineered to perform. Your expertise makes them shine. Together, we create content that inspires.
Landscape fabric we manufacture for the tradeSHIELD, XBAR and TERRA are made by us and quoted by the pallet. Pallet orders ship direct from Miami Gardens, FL.




Wholesale landscape fabric for contractors, farms and nurseries